About This

LOW-LIGHT MOTION DETECTION - Sensor lights indoor activate automatically in dim conditions when movement is detected within 13-18 ft and a 120-degree sensing angle. In AUTO mode, each light stays on for 60 seconds after triggering, then turns off to limit unnecessary use; it will not trigger in daylight.
THREE COLORS, UP-AND-DOWN GLOW - Stair lights indoor cast light upward and downward for a balanced wall wash. Short-press to choose 1600K candlelike amber, 2700K warm white, or 5000K cool white, so late-night paths, closets, and task areas can use a tone that fits the space.
RECHARGE FOUR WITH ONE CABLE - Each rechargeable motion sensor light has a 500mAh lithium-polymer battery. The included 4-in-1 USB-C cable connects all four lights to a compatible 5V USB source; red indicates charging and green indicates a full charge. Approximate charge time is 2 hr 21 min. At 100% brightness in ON mode, measured runtime is about 10 hr 44 min under test conditions; actual results vary.
THREE MODES AND STEPLESS DIMMING - Use each rechargeable night light in AUTO for low-light motion sensing, OFF for storage, or ON for continuous illumination. Long-press to adjust brightness from 10%-100%; the light flashes twice at each endpoint. Power-on defaults are 1600K amber and 100% brightness.
TOOL-FREE MAGNETIC MOUNTING - These motion sensor stair lights attach directly to suitable metal surfaces or to the four included adhesive-backed metal plates, one per light. Each compact 2.64 x 2.56 x 0.63 in rounded-square housing lifts off easily for charging. Apply each plate once to a clean, dry, flat surface; repositioning can weaken adhesion.